favorite
favorite
hide
unhide
flag

Posted

print

NEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS - $19,900 (Beech Creek)

NEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 1 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 2 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 3 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 4 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 5 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 6 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 7 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 8 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 9 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 10 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 11 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 12 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 13 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 14 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 15 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 16 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 17 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 18 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 19 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 20 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 21 thumbnailNEW 2024 CFG TL65 TRACK SKID STEER CAB HEAT A/C HYDRAULIC PILOTS 22 thumbnail
condition: new
make / manufacturer: AGROTK CFG
model name / number: TL65
New 2024 CFG AGROTK TL65 track skid steer that I have ran through the shop and is setup and ready to work. The TL65 is a combination of Korean and Chinese components and is an economically priced bare bones simple skid steer which is kind of hard to come by in this high-tech new world. Machine is equipped with heat, A/C, joystick controls, hand and foot throttle, auxiliary hydraulics with case drain, universal Bobcat style quick attach, 66” bucket (we can swap to a new bucket of a different size if you’d like, machines track width is only 54 inch's), LED lights, 4 bottom roller undercarriages, etc. The layout and design remind you of the simple 1980’s Japanese equipment. These machines have pretty simple electrical controls. For example, if you don’t want to go to work, then don’t put the lap bar down to unlock the controls (similar to the 100 and 200 series Tak’s), so there’s no stupid push to operate button to find and push, etc. The controls are Eaton hydraulic pilot controls, and not crappy electronic joysticks. This machine has been changed to single hydraulic pilot drive control ISO pattern similar to a Takeuchi, Kubota, Caterpillar, etc. The machines come from the factory set up for a dual hydraulic pilot control H pattern similar to a Case but the bucket and boom features are opposite of a case. Once again, this machine has been set up for ISO pattern, if you would like it changed back to H pattern, I can do that. The auxiliary hydraulics are operated by a simple mechanical foot valve similar to how some of the 100 series Tak’s were. The machines have pretty strong Rexroth hydraulics for a machine of its size, and the tracks are 12” wide. The Korean 55hp LS Mtron L3C19 turbo diesel engine runs well. The machine does come with a built-in diagnostic system code reader. I’ve included a picture of one of the issues/errors the machine had. If you notice in the one picture instead of the dash saying running well, the dash displayed ECODE: 1485-11 which similar to the Bobcats is a very common ECU relay problem. I addressed the issue, cycled the ignition key, and the error reset with “running well” on its next start cycle.
If you purchase one of these machines elsewhere, please do not contact me about technical and setup questions. You people need to contact the seller you purchased your machine from for assistance.
The current wholesale price on this unit from me is $19,900.00 firm. Feel free to call show contact info if you feel this unit is a good fit for you.

TAGS- cat, caterpillar, kobelco, komatsu, kubota, gehl, hitachi, Doosan, Daewoo, case, bobcat, volvo, mini, miniexcavator, mini excavator, midi excavator, excavater, john deere, yanmar, snow, snowplow, snowmobile, cummins, ford, powerstroke, duramax, trailer, 4x4, chevrolet, dodge, diesel, dump truck, landscape, TAKEUCHI, TRACK, BACKHOE, BUCKET, PALLET FORKS, KENWORTH, PETERBILT, STONE, MASON, dumptruck, dump truck, dump trailer, construction, land clearing, forestry, ROCKHOUND, STUMP GRINDER, GRADER, HOTSHOT, TRACTOR, CAB, FARM, allis chalmers, agco, white, international, new Holland, KIOTI, leading solutions, john deere, fendt, massey ferguson, tractor, pto, HAY, SILAGE, DAIRY, MOWER, SNOWPLOW, GOOSENECK, SKIDSTEER, SKID STEER, BOBCAT, BOB CAT

post id: 7757433781

posted:

updated:

best of [?]

loading
reading
writing
saving
searching